NC STATE UNIVERSITY Mechanical Engineering Systems MES 305 Dr. Bill Fortney Temperature Measurements using Thermocouples honorable phase of the moon report format Laine Johnson Aaron Burge Lab perfect June 20, 2011 Introduction The purpose of this research science laboratory was to evidence the bar of liquid temperatures using thermocouple junctions, the most common rule of amount and controlling temperatures. We watched a pre-lab video that explained the definition of a thermocouple (a junction surrounded by 2 dissimilar metals). indeed the video introduced the Seebek effect, the Peltier effect, the Thomas effect and the Law of negotiate Temperatures. During the lab we handlingd thermocouples to demonstrate each of these effect and the Law of negotiate Temperatures. Thermocouples are suitable for measuring over a life-size temperature range, up to 2300?. They are not suited for instruments that need exceedingly precise and accurate m easurements. As an Engineer you must be able to work with and understand the applications of thermocouples. Here is a jolt of applications that are well suited for the use of thermocouples: kilns, bumble turbine exhaust, diesel motor motor engines and many gas-fed heating appliances (ovens and water heaters that make use of a pilot flame to ignite the main gas burner). germane(predicate) Theory When working with thermocouples you will need to know the 3 effects and the laws pertaining to the thermocouple. 1) The Seebek effect showed that a thermocouple produced a emf dominance (or emf), measured in millivolts, in the wire which in morsel caused a temperature difference.
There is a reproducible kindred between the emf and the temperatures (T1 and T2). Seebek effect ?AB = [?emf?T]opencircuit equation #1 Where A and B refer to the two materials that take the thermocouple. emf is the voltage potential T...If you indigence to get a full essay, order it on our website:
OrderCustomPaper.comIf you want to get a full essay, visit our page:
write my paper
No comments:
Post a Comment